All Products
-
Customer BNow I enjoy our work. Only buy your end mills. Not so much, but only you.
-
Customer RToday I tested 50HRC 3 flutes end mill for aluminum. It was very very good. Cuts very good. It barely makes a sound.If you stop watching the machine, you cannot say it is cutting.
Contact Person :
Jane
Phone Number :
86-13685240516
Whatsapp :
+8613685240516
Keywords [ end cutting reamer ] match 33 products.
1/2" 12mm Solid Carbide Roughing End Mills For Steel
Product Name: | HRC55 Roughing End Mill 12mm |
---|---|
Coating: | AlTiSiN/Others |
Raw Material: | WF25 |
0.787" 20mm Hss Titanium Roughing End Mills Set HRC55 RLD Tools
Product Name: | HRC55 Roughing End Mill 20mm |
---|---|
Coating: | AlTiSiN/Others |
Raw Material: | WF25 |
1mm 1/25" 1/8" 1/16" 2 Flute End Mill Stainless Steel Tungsten Carbide Milling Bits For Jewelry
Product: | HRC60 2 Flute Solid Carbide End Mill 1mm |
---|---|
Raw Material: | GU25UF |
Diameter: | 1mm |
2 Flutes Ball Nose End Mill 2mm 30 Degree For High Hardness Mold Steel
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Diameter: | R1.0 |
Flute Length: | 4mm |
HRC65 Hardness Carbide Ball Nose End Mill 3mm 2 Flutes 30 Degree For Hard Steel
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Diameter: | R1.5 |
Flute Length: | 6mm |
RLD Solid Carbide End Mill Dlc Coated For Aluminum Endmill 6mm 1/4"
Certification: | ISO |
---|---|
Product Name: | RLD Solid Carbide New Design End Mill Dlc Coated For Aluminum |
Controlling Mode: | Controlling Mode |
0.393" 3/8 Large Cobalt Carbide Roughing End Mill
Product Name: | HRC50 3 Flutes Roughing End Mill For Aluminum |
---|---|
Coating: | Uncoated/customized |
Raw Material: | YG10X Carbide |
1/2 3 Flute End Mill 1/4" 6mm Aluminum Roughing End Mill For Steel Carbide
Product Name: | HRC50 3 Flute Aluminum End Mill For Rough Milling |
---|---|
Flute Dia: | 6mm |
Flute Length: | 18mm |
Carbide 2 Flutes Ball Nose End Mill HRC65 4mm 1/8 Inch For Hard Steel
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Brand: | RLD |
Diameter: | R2 |
Titanium Carbide Ball Nose End Mill HRC65 10mm Shank Diameter 2 Flutes
Product Name: | HRC65 Ball Nose End Mill |
---|---|
Brand: | RLD |
Diameter: | R5 |